Particle Boards

Ecoboards are panel products that are engineered from agri-residues. Specific sized varieties are used in making the board, bounded by special synthetic resin with low formaldehyde emissions pressed under heat and pressure. The boards produced are denser and more uniform in their constitution as compared to plywood or general wood.

1. Product Variants

Ecoboard Particleboards are available in a range of functional variants, based on the applications they are specifically produced for. These variants satisfy international standards of quality and performance, and are ideally suited for a wide range of applications.

2. Interior Grade Particleboards

Ecoboard Interior Grade Particleboards are made specifically for use in interior applications like furniture, interior fixtures like shelves, wall units, etc. These boards meet international standards of quality and safety, as per EN 312, type P II, E2 and Indian standards IS 3087, grade II.

Available in a wide range of sizes (13.5×6, 9×6, 8×6, 6.7×6, 6×3, 6×4)
Available in multiple thicknesses from 8 mm to 40 mm.

3. Exterior Grade Particleboards

The Exterior Grade series is a highly durable and strong range of particleboards by Ecoboard. It is resistant to boiling water and cyclic changes in weather. These boards are superior to any of the other exterior grade particleboards produced in the country. The special property of the boiling water test of our boards is specified in DIN 68763 as V – 100 Test.

It is also given in IS -3087 for grade-1 boards.

4. E0 Grade Particleboards

E0 particleboards from Ecoboard when tested with the perforator method, give results where the free formaldehyde in the particleboard shall be less than 5 mg per 100 gm of oven dry boards tested as per the requirements of IS 13745 for formaldehyde emission and passes the requirements of IS 3087 Grade I and Grade II as well as EN 120. This range of boards surpasses pre-requisites of most international furniture and real estate companies for their eco-friendly standards.

5. E1 Grade Particleboards

E1 particleboards from Ecoboard pass the requirements of IS 3087 Grade I and Grade II. These boards fulfill stringent norms of bending strength, screw-withdrawal strength and modulus of elasticity allowing manufacturers tremendous flexibility in creation of furniture and allied products.

E1 particleboards from Ecoboard pass the requirements of IS 3087 Grade I and Grade II as well as EN 120 having formaldehyde content of less than 8 mg per 100 gm of oven dry boards tested as per IS 13745. These boards fulfill stringent norms of bending strength, screw-withdrawal strength and modulus of elasticity allowing manufacturers tremendous flexibility in creation of furniture and allied products.

All for Joomla All for Webmasters